Hello,
I'm receiving your beacon signal on 10.133.5 MHz.
The signal is very clear!
RST is 539
My RTX is ICOM IC-7300 and ANT is random wire 12m on balcony (see QRZ.com).
TNX and 73
Antonio IK8SQG
05.12.2016 - 15:12 GMT
HB4FV - Beacon team
04-12-2016 11:32:27
Thank you very much !!
For all your reports, and also for information about your listening conditions.
Best regards from the beacon team HB4FV
SP9BCH , Jan
04-12-2016 04:07:59
Hi OM's
Hello I'am receiving your beacon HB4FV/B very strong signal in my QTH Niepolomice near Krakow , loc KO00ca
Receiving the signal on 10133.5 kHZ at 14.00Z , RST: 5 5/8 9
My equipment : FT-897 , antenna: dipole 10mc , 7 m up ground .
Interesting info and photos on qrz.com.
73
Jan SP9BCH
DL9FC, Peter
01-12-2016 21:48:27
Hi dear OMs,
I am jusst listening to your beacon in my qth nr. Hamburg.on qrg 10.133,5 mc, RST is 579 in the peaks, in qsb abt 539. Very good ssignal.
My stn is Kenwood TS2000 and Magnetic Loop Antenna outdoor in abt 8 m height. Diameter of the loop is 170 cm.
Best 73s
Peter, DL9FV
Antonio Martin EA4AX
01-12-2016 02:32:33
Hello,
Nice signal from Beacon 13:26 UTC 01-12-2016
Nice view your QRZ.com info...
Regars From Madrid-Spain
Antonio
Ted
28-11-2016 07:00:08
HB4FV/4 heard in Poland ?yrardów KO02FB rprt 529 to 599 2016.11.25 at 7.05 Itd Antenna lw 16.8 m 5 m above gnd gl for more experiments .73 ! de sp5oxp Ted
Ola Noren
27-11-2016 04:02:07
Loud and clear at 10.133.5 MHz
RST 559 peaking 569
2016 11 27 at 15:00 UTC
Antenna is Horizontal Loop 85m
73 and Hej de sm0cuh /OLa
Franky
29-10-2016 01:22:46
Receiving the signal fom HB4FV/P even at 12:21pm.
solid copy with 500mw. antenna is hexbeam, so not even antenne for 30m hihi.
Keep up the good work.
73s
Frank, ON7RU
iz2dqb
16-10-2016 01:06:23
Hello I am receiving your beacon HB4FV/B very strong. Congrats for your good work.
Here after some details.
Freq 10133 khz
Call hb4fv/b loc jn36eq
Pwr 500 mw
My rig elad fdm duo
My ant 40 m doubley
73 de IZ2DQB Francesco
Ulli
12-09-2016 05:25:05
Dear,
your 500mW beacon on 30m, 10133.5 was heard quite clearly in jo10os, western Belgium
about 5-10db above noiselevel
ant = 7m active vertical for rx only on ground system - broadband high-impedance pre-amp at ant feedpoint, therefore active antenna... fed by Cat5 sym wire over very large common-mode inductor - 10 turns of Cat-5 wire over large stack of 5x N30 ringcores...